Your Shopping Cart
Contains 0 items.
Total: $0.00
  VIEW CART & CHECKOUT

    

CATALOG CONTENTS

WHY BUY TWO-WAY RADIOS?

WHY CONVERT FROM ANALOG
DO DIGITAL (DMR)?

Specials

Closeouts

Two Way Radios

CB Antennas  New!

Amateur Antennas New!

Railroad Radios
Aircraft Radios

Amplifiers

Antennas, Towers

InBuilding Wifi_Solutions
Tripods, Antenna Mounts, Masts
Batteries/Chargers/Conditioners
Bench Equipment/Other Test Equipment
Cable & Connectors
Call Boxes
Converters And Inverters
Data And Telemetry Radios

Jumper Cables
Lease Plan
Marine Two Way

Microphones And Headsets
Pagers And Monitor Pagers
Power Supplies
Repeaters And Base Stations
Service Monitors/Test Equipment
Speakers, Hailers, Megaphones


 

  
Auburn Technology Corporation
P-20A RF Probe (100 kHz to 3 GHz)

Expand the capabilities of your spectrum analyzer or other 50 ohm instruments.
 


  The P-20A is a 10:1 RF Voltage Probe that is to spectrum analyzers and power meters  what a 10:1 scope probe is to oscilloscopes.

  The P-20A RF Probe provides a 500 ohm input impedance to the circuit being tested - a sufficiently high value to minimize loading effects in most RF circuits.  Special construction produces less than one pF of capacitive loading to provide exceptional high frequency performance. 

  
Features:

Cost:  $ 245.00 

  • Low Distortion, Passive RF Design
  • Light RF Loading Characteristics
  • Internal 50V DC Block
  • 10:1 Voltage Ratio
  • dBm Power Readings
    20 dB Attenuation: When Probing 50 Ohm RF Circuits
  • 100 kHz to 3 GHz frequency response

 

  • Rugged Design
  • Interchangeable ground clips
  • One meter heat resistant cable
  • 1 GHz Long Ground Clip
  • 2 GH Short Ground Clip
  • Center Pin Extender
  • One year limited warranty
  • MADE IN USA

Includes the following:
  1. Direct barrel
  2. Short pin ground clip
  3. Flexible ground clip
  4. Description, theory of operation
  5. Probe response charts
  6. RF voltage measurements description
  7. RF power measurement description
  8. Power level conversion chart
  9. Correction factor for loading effects
  10. RF Signal injection description
  11. Performance verification write-up
  12. Cross reference level chart  dbm/volts/power
  13. Specification chart
P20A RF Probe 
Customer Comments:

I have found this probe to be a robust and invaluable tool for troubleshooting RF circuits and the quality of workmanship is second to none.  I highly recommend it.

 

Company:  IFR, an Aeroflex Company
Information provided by:  Wray Odom

 

 

Register  | SpecialsRentalsGovernment Agencies  | Product LinesCellular | ContactTerms/Condition/Shipping